View DS1284Q_4151945.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DS1284/DS1286 Watchdog Timekeepers
www.maxim-ic.com
GENERAL DESCRIPTION
The DS1284/DS1286 watchdog timekeepers are self-contained real-time clocks, alarms, watchdog timers, and interval timers in a 28-pin JEDEC DIP and encapsulated DIP package. The DS1286 contains an embedded lithium energy source and a quartz crystal, which eliminates the need for any external circuitry. The DS1284 requires an external quartz crystal and a VBAT source, which could be a lithium battery. Data contained within 64 8-bit registers can be read or written in the same manner as byte-wide static RAM. Data is maintained in the watchdog timekeeper by intelligent control circuitry that detects the status of VCC and write protects memory when VCC is out of tolerance. The lithium energy source can maintain data and real time for over 10 years in the absence of VCC. Watchdog timekeeper information includes hundredths of seconds, seconds, minutes, hours, day, date, month, and year. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including correction for leap year. The DS1284/DS1286 operate in either 24-hour or 12hour format with an AM/PM indicator. The devices provide alarm windows and interval timing between 0.01 seconds and 99.99 seconds. The real-time alarm provides for preset times of up to one week.
FEATURES
Keeps Track of Hundredths of Seconds, Seconds, Minutes, Hours, Days, Date of the Month, Months, and Years; Valid Leap Year Compensation Up to 2100 Watchdog Timer Restarts an Out-of-Control Processor Alarm Function Schedules Real-Time-Related Activities Embedded Lithium Energy Cell Maintains Time, Watchdog, User RAM, and Alarm Information Programmable Interrupts and Square-Wave Outputs Maintain JEDEC Footprint All Registers are Individually Addressable via the Address and Data Bus Accuracy is Better than 1 Minute/Month at +25C (EDIP) Greater than 10 Years of Timekeeping in the Absence of VCC 50 Bytes of User NV RAM Underwriters Laboratory (UL) Recognized -40C to +85C Industrial Temperature Range Option
Pin Configurations appear at end of data sheet.
ORDERING INFORMATION
PART TEMP RANGE 0C to +70C DS1284 -40C to +85C DS1284N 0C to +70C DS1284Q 0C to +70C DS1284Q+ 0C to +70C DS1284Q/T&R 0C to +70C DS1284Q+T&R -40C to +85C DS1284QN -40C to +85C DS1284QN+ -40C to +85C DS1284QN/T&R -40C to +85C DS1284QN+T&R 0C to +70C DS1286 -40C to +85C DS1286I -40C to +85C DS1286I+ + Denotes a lead-free/RoHS-compliant package. VOLTAGE (V) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 PIN-PACKAGE 28 DIP (600 mils) 28 DIP (600 mils) 28 PLCC 28 PLCC 28 PLCC/Tape and Reel 28 PLCC/Tape and Reel 28 PLCC 28 PLCC 28 PLCC/Tape and Reel 28 PLCC/Tape and Reel 28 EDIP (720 mils) 28 EDIP (720 mils) 28 EDIP (720 mils) TOP MARK* DS1284 DS1284 N DS1284Q DS1284Q DS1284Q DS1284Q DS1284QN DS1284QN DS1284QN DS1284QN DS1286 DS1286 IND DS1286 IND
* A "+" anywhere on the top mark indicates a lead-free package.
1 of 18
REV: 032406
DS1284/DS1286
OPERATION--READ REGISTERS
The DS1284/DS1286 execute a read cycle whenever WE (write enable) is inactive (high) and CE (chip enable) and OE (output enable) are active (low). The unique address specified by the six address inputs (A0-A5) defines which of the 64 registers is to be accessed. Valid data is available to the eight data output drivers within tACC (access time) after the last address input signal is stable, provided that CE and OE access times are also satisfied. If OE and CE access times are not satisfied, then data access must be measured from the latter occurring signal (CE or OE) and the limiting parameter is either tCO for CE or tOE for OE rather than address access.
OPERATION--WRITE REGISTERS
The DS1284/DS1286 are in the write mode whenever the WE and CE signals are in the active-low state after the address inputs are stable. The latter occurring falling edge of CE or WE determines the start of the write cycle. The write cycle is terminated by the earlier rising edge of CE or WE. All address inputs must be kept valid throughout the write cycle. WE must return to the high state for a minimum recovery state (tWR) before another cycle can be initiated. Data must be valid on the data bus with sufficient data setup (tDS) and data hold time (tDH) with respect to the earlier rising edge of CE or WE. The OE control signal should be kept inactive (high) during write cycles to avoid bus contention. However, if the output bus has been enabled (CE and OE active), then WE will disable the outputs in tODW from its falling edge.
DATA RETENTION
The watchdog timekeeper provides full functional capability when VCC is greater than VTP. Data is maintained in the absence of VCC without any additional support circuitry. The DS1284/DS1286 constantly monitor VCC. Should the supply voltage decay, the watchdog timekeeper automatically write protects itself, and all inputs to the registers become "don't care." Both INTA and INTB (INTB) are open-drain outputs. The two interrupts and the internal clock continue to run regardless of the level of VCC. However, it is important to ensure that the pullup resistors used with the interrupt pins are never pulled up to a value greater than VCC + 0.3V. As VCC falls below the battery voltage, a power-switching circuit turns on the lithium energy source to maintain the clock and timer data functionality. Also ensure that during this time (battery-backup mode), the voltage present at INTA and INTB (INTB) never exceeds the battery voltage. If the active-high mode is selected for INTB (INTB), this pin only goes high in the presence of VCC. During power-up, when VCC rises above approximately 3.0V, the power-switching circuit connects external VCC and disconnects the VBAT energy source. Normal operation can resume after VCC exceeds VTP for tREC.
WATCHDOG TIMEKEEPER REGISTERS
The watchdog timekeeper has 64 8-bits-wide registers that contain all the timekeeping, alarm, watchdog, control, and data information. The clock, calendar, alarm, and watchdog registers are memory locations that contain external (user-accessible) and internal copies of the data. The external copies are independent of internal functions, except that they are updated periodically by the simultaneous transfer of the incremented internal copy (see Figure 1). The command register bits are affected by both internal and external functions. This register is discussed later. The 50 bytes of RAM registers can only be accessed from the external address and data bus. Registers 0, 1, 2, 4, 6, 8, 9, and A contain time-of-day and date information (see Figure 2). Time-of-day information is stored in binary-coded decimal (BCD). Registers 3, 5, and 7 contain the time-of-day alarm information. Time-of-day alarm information is stored in BCD. Register B is the command register and information in this register is binary. Registers C and D are the watchdog alarm registers and information stored in these two registers is in BCD. Registers E to 3F are user bytes and can be used to contain data at the user's discretion.
2 of 18
DS1284/DS1286
PIN DESCRIPTION
DIP 1 PIN EDIP 1 PLCC 1 NAME INTA FUNCTION Active-Low Interrupt Output A. This open-drain pin requires a pullup resistor for proper operation. Connections for Standard 32.768kHz Quartz Crystal. The internal oscillator circuitry is designed for operation with a crystal having a specified load capacitance (CL) of 6pF. The crystal is connected directly to the X1 and X2 pins. There is no need for external capacitors or resistors. For more information on crystal selection and crystal layout considerations, refer to Application Note 58: Crystal Considerations with Dallas Real Time Clocks. No Connection Address Inputs Data Input/Output Ground Active-Low Chip-Enable Input Active-Low Output-Enable Input Square-Wave Output. Push-pull output. High impedance when VCC is below VTP. Active-Low RAM Clear. Used to clear (set to logic 1) all 50 bytes of user NV RAM, but does not affect the registers involved with time, alarm, and watchdog functions. To clear the RAM, RCLR must be forced to an input logic 0 (-0.3V to +0.8V) during battery-backup mode when VCC is not applied. The RCLR function is designed to be used via human interface (shorting to ground or by switch) and not be driven with external buffers. This pin is internally pulled up and should be left floating when not in use. Input for Any Standard 3V Lithium Cell or Other Energy Source. Input voltage must be held between the minimum and maximum limits for proper operation. The supply should be connected directly to the VBAT pin. A diode must not be placed in series with the battery to the VBAT pin. Furthermore, a diode is not necessary because reverse charging current-protection circuitry is provided internal to the device and has passed the requirements of Underwriters Laboratories for UL listing. This pin should be grounded but can be left floating. Active-Low (Active-High) Interrupt Output B. When the activehigh state is selected (IBH = 1), an open-drain pullup transistor connected to VCC sources current when the output is active. When the active-low state is selected (IBH = 0), an open-drain pulldown transistor connected to ground sinks current when the output is active. If active-high output operation is selected, a pulldown resistor is required for proper operation. When activelow output operation is selected, a pullup resistor is required for proper operation. Active-Low Write-Enable Input
3 of 18
2, 3
--
2, 3
X1, X2
4 5-10 11, 12, 13, 15, 16-19 14, 21 20 22 23
2, 3, 4, 21, 24, 25 5-10 11, 12, 13, 15, 16-19 14 20 22 23
4 5-10 11, 12, 13, 15, 16-19 14, 21 20 22 23
N.C. A5-A0 DQ0, DQ1, DQ2, DQ3, DQ4-DQ7 GND CE OE SQW
24
--
24
RCLR
25
--
25
VBAT
26
26
26
INTB (INTB)
27
27
27
WE
DS1284/DS1286
DIP
PIN EDIP
PLCC
NAME
FUNCTION Primary Power-Supply Input. When voltage is applied within normal limits, the device is fully accessible and data can be written and read. When a backup supply is connected to the device and VCC is below VTP, read and writes are inhibited. However, the timekeeping function continues unaffected by the lower input voltage.
28
28
28
VCC
Figure 1. Block Diagram
VCC X1 X2 DS1286 only /4 Internal Registers Address Decode and Control External Registers, clock, calendar, time of day alarm Command Register 100Hz User RAM 50 Bytes Internal Counters External Registers Watchdog Alarm Internal Counters 100Hz Internal Registers External Registers Hundredths of Seconds Update seconds through years and check time of day alarm TD INT Swap pins WD INT VCC IBH
P N
VBAT Oscillator /8 / 40.96 / 40.96 PF delay / 10 Power Switch GND DS1286 only 1024Hz SQW INTA
A0-A5 CE OE WE
INTB/ (INTB)
N
DS1284/DS1286
Data I/O Buffers DQ0-DQ7
4 of 18
DS1284/DS1286
HUNDREDTHS-OF-SECONDS GENERATOR
The hundredths-of-seconds generator circuit shown in the Block Diagram (Figure 1) is a state machine that divides the incoming frequency (4096Hz) by 41 for 24 cycles and 40 for 1 cycle. This produces a 100Hz output that is slightly off during the short term, and is exactly correct every 250ms. The divide ratio is given by: Ratio = [41 x 24 + 40 x 1] / 25 = 40.96 Thus, the long-term average frequency output is exactly 100Hz. Figure 2. Watchdog Timekeeper Registers
5 of 18
DS1284/DS1286
TIME-OF-DAY REGISTERS
Registers 0, 1, 2, 4, 6, 8, 9, and A contain time-of-day data in BCD. Ten bits within these eight registers are not used and always read 0 regardless of how they are written. Bits 6 and 7 in the months register (9) are binary bits. When set to logic 0, EOSC (bit 7) enables the RTC oscillator. This bit is set to logic 1 as shipped from Dallas Semiconductor to prevent lithium energy consumption during storage and shipment. The user normally turns this bit on during device initialization. However, the oscillator can be turned on and off as necessary by setting this bit to the appropriate level. Bit 6 of this same byte controls the squarewave output (pin 23). When set to logic 0, the square-wave output pin outputs a 1024Hz square-wave signal. When set to logic 1, the square-wave output pin is in a high-impedance state. Bit 6 of the hours register is defined as the 12- or 24-hour select bit. When set to logic 1, the 12-hour format is selected. In the 12-hour format, bit 5 is the AM/PM bit with logic 1 being PM. In the 24-hour mode, bit 5 is the second 10-hour bit (20-23 hours). The time-of-day registers are updated every 0.01 seconds from the RTC, except when the TE bit (bit 7 of register B) is set low or the clock oscillator is not running. The preferred method of synchronizing data access to and from the watchdog timekeeper is to access the command register by doing a write cycle to address location 0B and setting the TE (transfer enable) bit to a logic 0. Doing so freezes the external time-of-day registers at the present recorded time, allowing access to occur without danger of simultaneous update. When the watch registers have been read or written, a second write cycle to location 0B, setting the TE bit to a logic 1, puts the time-of-day registers back to being updated every 0.01 second. No time is lost in the RTC because the internal copy of the time-of-day register buffers is continually incremented while the external memory registers are frozen. An alternate method of reading and writing the time-of-day registers is to ignore synchronization. However, any single read may give erroneous data as the RTC may be in the process of updating the external memory registers as data is being read. The internal copies of seconds through years are incremented and time-of-day alarm is checked during the period that hundreds of seconds read 99 and are transferred to the external register when hundredths of seconds roll from 99 to 00. A way of making sure data is valid is to do multiple reads and compare. Writing the registers can also produce erroneous results for the same reasons. A way of making sure that the write cycle has caused proper update is to do read verifies and re-execute the write cycle if data is not correct. While the possibility of erroneous results from reads and write cycles has been stated, it is worth noting that the probability of an incorrect result is kept to a minimum due to the redundant structure of the watchdog timekeeper.
TIME-OF-DAY ALARM REGISTERS
Registers 3, 5, and 7 contain the time-of-day alarm registers. Bits 3, 4, 5, and 6 of register 7 always read 0 regardless of how they are written. Bit 7 of registers 3, 5, and 7 are mask bits (Figure 3). When all the mask bits are logic 0, a time-of-day alarm only occurs when registers 2, 4, and 6 match the values stored in registers 3, 5, and 7. An alarm is generated every day when bit 7 of register 7 is set to logic 1. Similarly, an alarm is generated every hour when bit 7 of registers 7 and 5 is set to logic 1. When bit 7 of registers 7, 5, and 3 is set to logic 1, an alarm occurs every minute when register 1 (seconds) rolls from 59 to 00. Time-of-day alarm registers are written and read in the same format as the time-of-day registers. The time-of-day alarm flag and interrupt is always cleared when alarm registers are read or written.
6 of 18
DS1284/DS1286
WATCHDOG ALARM REGISTERS
Registers C and D contain the time for the watchdog alarm. The two registers contain a time count from to 99.99 seconds in BCD. The value written into the watchdog alarm registers can be written or read in any order. Any access to Registers C or D causes the watchdog alarm to reinitialize and clears the watchdog flag bit and the watchdog interrupt output. When a new value is entered or the watchdog registers are read, the watchdog timer starts counting down from the entered value to 0. When 0 is reached, the watchdog interrupt output goes to the active state. The watchdog timer countdown is interrupted and reinitialized back to the entered value every time either of the registers is accessed. In this manner, controlled periodic accesses to the watchdog timer can prevent the watchdog alarm from ever going to an active level. If access does not occur, the countdown alarm is repetitive. The watchdog alarm registers always read the entered value. The actual countdown register is internal and is not readable. Writing Registers C and D to 0 disables the watchdog alarm feature.
COMMAND REGISTER (0Bh)
Bit #: Name: BIT 7 TE BIT 6 IPSW BIT 5 IBH BIT 4 PU/LVL BIT 3 WAM BIT 2 TDM BIT 1 WAF BIT 0 TDF
Note: The initial state of these bits is not defined.
Bit 7: Transfer Enable (TE). This bit when set to logic 1 allows the internal time and date counters to update the user accessible registers. When set to logic 0, the external, user-accessible time and date registers remain static when being read or written, while the internal counters continue to run. The function of this bit is further described in the time-of-day registers section Bit 6: Interrupt Pin Swap (IPSW). This bit directs which type of interrupt is present on interrupt pins INTA or INTB (INTB). When set to logic 1, INTA becomes the time-of-day alarm interrupt pin and INTB (INTB) becomes the watchdog interrupt pin. When bit 6 is set to logic 0, the interrupt functions are reversed such that the time-of-day alarm is output on INTB (INTB) and the watchdog interrupt is output on INTA. Caution should be exercised when dynamically setting this bit as the interrupts are reversed even if in an active state. Bit 5: Interrupt B Active High/Low (IBH). When bit 5 is set to logic 1, the B interrupt output sources current when active. When bit 5 is set to logic 0, the B interrupt output sinks current when active. Bit 4: Pulse/Level Output (PU/LVL). When set to logic 1, the pulse mode is selected and INTA sinks current for a minimum of 3ms and then releases. Output INTB (INTB) either sinks or sources current for a minimum of 3ms depending on the level of bit 5. The watchdog timer continues to run and WAF is cleared at the end of the pulse. When set to a logic 0, both INTA and INTB (INTB), when active, output an active low (INTB (INTB) active high when IBH = 1) until the interrupt is cleared. Bit 3: Watchdog Alarm Mask (WAM). When this bit is written to logic 1, the watchdog interrupt output is deactivated regardless of the state of WAF. When WAM is set to logic 0 and the WAF bit is set to a 1, the watchdog interrupt output goes to the active state, which is determined by bits 1, 4, 5, and 6 of the command register. Bit 2: Time-of-Day Alarm Mask (TDM). When this bit is written to logic 1, the time-of-day alarminterrupt output is deactivated regardless of the state of TDF. When TDM is set to logic 0, the time-of-day
7 of 18
DS1284/DS1286
interrupt output goes to the active state, which is determined by bits 0, 4, 5, and 6 of the command register. Bit 1: Watchdog Alarm Flag (WAF). When this bit is set internally to logic 1, a watchdog alarm has occurred. This bit is read-only and writing this register has no effect on the bit. The bit is reset when any of the watchdog alarm registers are accessed. The WAM bit has no effect on the operation of this bit. If pulse mode (PU/LVL = 1) is selected, the watchdog continues to run and the flag is internally written to 0 at the end of the pulse. The WAM bit has no effect on the operation of this bit. Bit 0: Time-of-Day Alarm Flag (TDF). When this bit is set internally to a logic 1, indicates that a match with the time-of-day alarm registers has occurred. This bit is read-only and writing this register has no effect on the bit. The time of the alarm can be determined by reading the time-of-day alarm registers. The bit is reset when any of the time-of-day alarm registers are read. The TDM bit has no effect on the operation of this bit. Figure 3. Time-of-Day Alarm Mask Bits (03h) MINUTES 1 0 0 0 REGISTER (05h) HOURS 1 1 0 0 (07h) DAYS 1 1 1 0 FUNCTION Alarm once per minute Alarm when minutes match Alarm when hours and minutes match Alarm when hours, minutes, and days match
8 of 18
DS1284/DS1286
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Pin Relative to Ground.....................................................-0.3V to +7.0V Operating Temperature Range Commercial............................................................................................0C to +70C Industrial.............................................................................................-40C to +85C Storage Temperature Range...........................................................................-40C to +85C Soldering Temperature......................................See IPC/JEDEC J-STD-020 Specification (Note 13)
Stresses beyond those listed as "Absolute Maxim Ratings" may cause permanent damage to the device. These are stress ratings only, any functional operation of the device at these or any other conditions beyond the those indicated in operations section of the specifications is no implied. Exposure to absolute maximum ratings for extended periods may affect device reliability.
RECOMMENDED DC OPERATING CONDITIONS
(TA = -40C to +85C or 0C to +70C.) PARAMETER SYMBOL Power-Supply Voltage Input Logic 1 Input Logic 0 VBAT Input Voltage VCC VIH VIL VBAT MIN 4.5 2.2 -0.3 2.4 3.0 TYP 5.0 MAX 5.5 VCC + 0.3 +0.8 3.5 UNITS V V V V NOTES 10 10 10 10
DC ELECTRICAL CHARACTERISTICS
(VCC = 5V 10%, TA = -40C to +85C or 0C to +70C.) PARAMETER SYMBOL MIN Input Leakage Current IIL -1.0 Output Leakage Current ILO -1.0 I/O Leakage Current ILIO -1.0 CE VIH VCC Output Current at 2.4V IOH -1.0 Output Current at 0.4V IOL 2.0 Standby Current CE = 2.2V ICCS1 Standby Current CE > VCC - 0.5 ICCS2 Active Current ICC 1.088 Write-Protection Voltage VTP x VBAT TYP MAX +1.0 +1.0 +1.0 UNITS A A A mA mA mA mA mA V NOTES
3.0
1.26 x VBAT
7.0 4.0 15 1.324 x VBAT
DC ELECTRICAL CHARACTERISTICS
(VCC = 0V, VBAT = 2.4V to 3.5V, TA = 0C to +70C.) PARAMETER SYMBOL MIN Battery Current (EOSC = 0) IBAT TYP +0.5 MAX +0.6 UNITS A NOTES
9 of 18
DS1284/DS1286
CAPACITANCE
(TA = +25C) PARAMETER Input Capacitance Output Capacitance Input/Output Capacitance SYMBOL CIN COUT CI/O MIN TYP 7 7 7 MAX 10 10 10 UNITS pF pF pF NOTES
AC ELECTRICAL CHARACTERISTICS
(VCC = 4.5V to 5.5V, TA = -40C to +85C or 0C to +70C.) PARAMETER SYMBOL MIN Read Cycle Time tRC 150 Address Access Time tACC CE Access Time tCO OE Access Time tOE OE or CE to Output Active tCOE 10 Output High-Z from Deselect tOD Output Hold from Address Change tOH 10 Write Cycle Time tWC 150 Write Pulse Width tWP 140 Address Setup Time tAW 0 Write Recovery Time tWR 10 Output High-Z from WE tODW Output Active from WE tOEW 10 Data Setup Time tDS 45 Data Hold Time tDH 0 INTA, INTB Pulse Width tIPW 3 TYP MAX 150 150 60 60 UNITS ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ms NOTES 1
3
50
4 4,5 11,12
10 of 18
DS1284/DS1286
READ CYCLE (NOTE 1)
WRITE CYCLE 1 (NOTES 2, 6, 7)
11 of 18
DS1284/DS1286
WRITE CYCLE 2 (NOTES 2, 8)
TIMING DIAGRAM: INTERRUPT OUTPUTS PULSE MODE (NOTES 11, 12)
12 of 18
DS1284/DS1286
POWER-UP/POWER-DOWN CONDITION
PARAMETER CE at VIH before Power-Down VCC Slew from 4.5V to 0V (CE at VIH) VCC Slew from 0V to 4.5V (CE at VIH) CE at VIH after Power-Up SYMBOL tPD tF tR tREC MIN 0 350 100 TYP MAX UNITS s s s ns NOTES
150
POWER-DOWN/POWER-UP CONDITION
(TA = +25C) PARAMETER Expected Data-Retention Time (DS1286)
SYMBOL tDR
MIN 10
TYP
MAX
UNITS years
NOTES 9
WARNING: Under no circumstances are negative undershoots, of any amplitude, allowed when device is in battery-backup mode.
13 of 18
DS1284/DS1286
NOTES:
1. WE is high for a read cycle. 2. OE = VIH or VIL. If OE = VIH during write cycle, the output buffers remain in a high-impedance state. 3. tWP is specified as the logical AND of CE and WE. tWP is measured from the latter of CE or WE going low to the earlier of CE or WE going high. 4. tDS or tDH are measured from the earlier of CE or WE going high. 5. tDH is measured from WE going high. If CE is used to terminate the write cycle, then tDH = 20ns. 6. If the CE low transition occurs simultaneously with or later than the WE low transition in write cycle 1, the output buffers remain in a high-impedance state during this period. 7. If the CE high transition occurs prior to or simultaneously with the WE high transition, the output buffers remain in a high-impedance state during this period. 8. If WE is low or the WE low transition occurs prior to or simultaneously with the CE low transition, the output buffers remain in a high-impedance state during this period. 9. Each DS1284/DS1286 is marked with a four-digit date code AABB. AA designates the year of manufacture. BB designates the week of manufacture. The expected tDR is defined as starting at the date of manufacture. 10. All voltages are referenced to ground. 11. Applies to both interrupt pins when the alarms are set to pulse. 12. Interrupt output occurs within 100ns on the alarm condition existing.
13. RTC modules can be successfully processed through conventional wave-soldering techniques as long
as temperature exposure to the lithium energy source contained within does not exceed +85C. However, post-solder cleaning with water-washing techniques is acceptable, provided that ultrasonic vibrations are not used to prevent crystal damage.
AC TEST CONDITIONS
Output Load: 100pF + 1TTL Gate Input Pulse Levels: 0 to 3.0V Timing Measurement Reference Levels Input: 1.5V Output: 1.5V Input Pulse Rise and Fall Times: 5ns
14 of 18
DS1284/DS1286
PIN CONFIGURATIONS
TOP VIEW INTA X1 X2 N.C. A5 A4 A3 A2 A1 A0 DQ0 DQ1 DQ2 GND 1 28 27 2 3 DS1284 26 4 25 5 24 6 23 7 22 8 21 9 20 10 19 11 18 12 17 13 14 16 15 VCC WE INTB (INTB) VBAT RCLR SQW OE GND CE DQ7 DQ6 DQ5 DQ4 DQ3 INTA N.C. N.C. N.C. A5 A4 A3 A2 A1 A0 DQ0 DQ1 DQ2 GND 1 2 DS1286 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 VCC WE INTB (INTB) N.C. N.C. SQW OE N.C. CE DQ7 DQ6 DQ5 DQ4 DQ3
DIP (600 mils)
N.C. X2 X1 INTA VCC WE INTB (INTB)
EDIP (720 mils)
A5 A4 A3 A2 A1 A0 DQ0
5 6 7 8 9 10
4
3
2
1
28 27 26 25 24
DS1284
23 22 21 20 19
11 12 13 14
15 16 17 18
VBAT RCLR SQW OE GND CE DQ7
DQ1 DQ2 GND DQ3 DQ4 DQ5 DQ6
PLCC
15 of 18
DS1284/DS1286
PACKAGE INFORMATION
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/DallasPackInfo.)
PKG DIM A IN. MM B IN. MM D IN. MM D2 IN. MM E IN. MM E2 IN. MM F IN. MM H IN. MM
28-PIN PLCC MIN MAX 0.300 BSC 7.62 0.442 0.462 17.68 11.73 0.480 0.500 12.2 12.7 0.390 0.430 9.91 10.92 0.090 0.120 2.29 3.05 0.390 0.430 9.91 10.92 0.015 0.020 0.38 0.518 0.100 0.020 2.54 0.518
16 of 18
DS1284/DS1286
PACKAGE INFORMATION (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/DallasPackInfo.)
PKG DIM A IN. MM B IN. MM C IN. MM D IN. MM E IN. MM F IN. MM G IN. MM H IN. MM J IN. MM K IN. MM
28-PIN DIP MIN MAX 1.445 0.530 0.140 0.600 0.015 0.120 0.090 0.625 0.008 0.015 1.470 0.550 0.160 0.625 0.040 0.145 0.110 0.675 0.012 0.022
17 of 18
DS1284/DS1286
PACKAGE INFORMATION (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/DallasPackInfo.)
PKG DIM A IN. MM B IN. MM C IN. MM D IN. MM E IN. MM F IN. MM G IN. MM H IN. MM J IN. MM K IN. MM
28-PIN EDIP MIN MAX 1.520 1.540 38.61 39.12 0.695 0.720 17.65 18.29 0.350 0.375 8.89 9.52 0.100 0.130 2.54 3.30 0.015 0.030 0.38 0.76 0.110 0.140 2.79 3.56 0.090 0.110 2.29 2.79 0.590 0.630 14.99 16.00 0.008 0.012 0.20 0.30 0.015 0.021 0.38 0.53
NOTE: PINS 2, 3, 21, 24, AND 25 ARE MISSING BY DESIGN.
18 of 18
Maxim/Dallas Semiconductor cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim/Dallas Semiconductor product. No circuit patent licenses are implied. Maxim/Dallas Semiconductor reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
(c) 2006 Maxim Integrated Products * Printed USA
The Maxim logo is a registered trademark of Maxim Integrated Products, Inc. The Dallas logo is a registered trademark of Dallas Semiconductor Corporation.

▲Up To Search▲

Price & Availability of DS1284Q

	To Download DS1284Q Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .